If you have a big space in your life and you want to burn both wood and solid fuel, then this multi fuel version of Woody is the one for you. This stove allows you to reduce emissions and breath cleaner air but to have the choice of the fuel that you choose. Like its eco brother it is generously proportioned, yet slim, efficient, clean burning and quietly, modestly, magnificent.
To achieve lower emissions this penguin uses a combination of three features. Secondary heat retaining glazing, so the fire box stays hotter. Re-designed combustion air nozzles diffuse the incoming oxygen, allowing for a more complete combustion. Lastly the flow of air going toward the flue is interrupted, which increases the dwell time in the fire chamber, again contributing to more complete combustion.
The Woody Eco (Multi Fuel) is 83% efficient on wood and 87% efficient on anthracite.
This stove also has secondary heat retaining glazing, with air wash and a landscape view of the fire. It has the new stainless steel handle Chilli Penguin handle. There is an optional extra of extra height legs available.
Ecodesign stoves. In order to be an Ecodesign stove, a stove must be independently verified to meet stringent emission requirements. Particulates or PMs are the most commonly recognised of these measures. The maximum limit for these is 40 mg/m3. This stove achieves 20 mg/m3, burning wood, 16 mg/m3 burning smokeless fuel. All other measures are all listed in our technical details table below. Click here for further Ecodesign info.
Charred Red
Storm Blue
Polar Bear
Seal Grey
Evergreen
Penguin Black
See stove colours for more detail.
If you want to join our family gallery please get in touch.
| Fuel Type | Wood | Smokeless Fitted |
| Nominal Output | 4.8kw | 5kw |
| Efficiency | 82.7% | 87.4% |
| Dimensions | ||
| Woody (Multi Fuel) | ||
| Width 565mm | Depth 317mm | Height 584mm |
| Multi-fuel | Yes | |
| Colours Available | Yes | |
| Optional Direct air kit | Yes (factor fitted) | |
| Optional plinth available | Yes | |
| Approved for use in smoke control zones | Yes | |
| Log length ร diameter | length 430mm | diam 100mm |
| Flue collar diameter | 127mm (ID) | |
| Flue size required | 125mm | |
| Ecodesign measures | ||
| Particulates @ 13% O2 | 20mg/m3 | 16mg/mยณ |
| CO content @13% O2 | 0.09% | 0.04% |
| NOx mg/mยณ | 106mg/m3 | 161mg/mยณ |
| CxHy mg /mยณ | 89 mg/m3 | 11 mg/mยณ |
| Top Exit Rear Exit – adaptor required | standard pre-order | |
| Distance to combustibles + | ||
| side 400mm | rear 350mm | above 550mm |
| Distance to combustibles with insulated flue fitted to stove top * | ||
| Side 400 mm | rear 150mm | above 550 mm |
| Distance to non combustibles | ||
| side 100mm | rear 50mm | above 150mm |
| Hearth Type | no base heat shield/plinth | Constructional |
| Hearth Type | with base heat shield/plinth | 12mm |
| * these are the minimum distances, be aware that there are other considerations eg. access for sweeping, height of kettle etc | ||
| + if single wall ie. non insulated flue is used then the distance to combustibles at the rear is equal to 3 x flue diameter | ||