Here on this page you can find products that will complement your stove, from boilers to plinths to heat shields.

If you cannot find the part you are looking for please try the servicing and repairs page. If you are still unable to locate the product you need please contact us and we will be happy to assist.

Stove Plinth

Our plinths are used to give the stoves additional height as well as providing extra log storage underneath. They can be colour matched to your stove. Plinths are available for all of our stoves except for the Chilli Billie. Please see below for prices.

Plinth Model Price (inc VAT)
Short Penguin/Hungry Penguin £220
 Woody  £220
 Penguin 8  £235

Trivets, Stainless Steel

2 sizes available
small (approx 12 cmx12 cm x12cm)
large (approx 15cm x 15cm x15cm)

Short Penguin/Hungry Penguin
small penguin trivet £14 (incl vat)
large penguin trivet £22.80 (incl vat)

Stainless Steel Top Plate

This plate sits on the top surface of the stove. If you regularly use the top surface for boiling a kettle or for cooking it can become scratched and require touching up. This provides a very practical and attractive
alternative. (Pictured is the 88 top plate, hence the holes on the side to let the warm air from the convector panels escape)

£95-£135 (incl vat)

(Prices vary from model to model)

Rear Vertical Adaptor (RVA)

Designed for a rear exit from the back of the stove, then turning upwards/vertically. This replaces either a “90 degree T and cap” or “90 degree swept bend with soot collector”. The letterbox opening that can be seen in the image, attaches to the rear of the stove in place of the rectangular blanking plate.The same bolts are used to attach the rear flue box. The circular blanking plate that can be seen in the image is to blank off the top flue opening. Not required for the cooker models.

£140.00 (incl vat)

Rear Horizontal Adaptor (RHA)

Designed for a rear exit from the back of the stove and then continuing horizontally. Building regs only allow flue to go horizontally for a short specified length, discuss this with your HETAS fitter. The circular blanking plate is to blank off the top flue. Not required for the cooker models.

£140.00 (incl vat)

High Temperature Stove Paint, (5 colours plus black)

Supplied in aerosol form, available in all of our colours.This product cannot go via Royal Mail, it has to go on a carrier. Alot of stockists will have it in stock or it can be added to their next order.

£13.99 + (carriage via courier)

Expandable Frames for fireplace openings

If you are opening up an old fireplace and want to retain the old brick finish you can use these frames to give a clean sharp edge to the opening whilst covering up the edge of the facing plasterwork.

The frames will expand to fit a maximum opening size of :1120mm wide x 1050mm high

£114 (incl vat)

Stainless Steel Boiler

Short Penguin/ Hungry Penguin/ Fat Penguin/ High & Mighty/ Chubby £252 (incl vat)
Penguin 8/ Chubby 8/ Eighty Ate “88” (including shorty model) £418.80 (incl vat)
Woody £378 (incl vat

Wall Mounted Heat Shield

Power-coated steel sheets with brackets to maintain an air gap. In some installations, under specific circumstances, these can be used to reduce distances to combustibles. The standard sizes are listed below.

750x1050mm £174.00 inc VAT
900x1050mm £198.00 inc VAT

Direct Air Access

This is a Direct Air Access kit which can be used in some installations.

Please note – these must be factory fitted.

The Penguin Enclosure

The Penguin Enclosure is a heat enclosure for the Chillie Billie. It provides heat shielding at the base, rear and sides. There is also an integral fixed collar for the flue. The design of the enclosure maintains air gaps
between the shield and all surrounding surfaces.

Enclosure Sold Separately: £350 RRP inc VAT
Square corner enclosure Sold Separately: £425 RRP inc VAT
Chilli Billie and Enclosure package: £ RPP 1199 inc VAT
Chilli Billie and square corner enclosure package: £1275 RRP inc VAT 

Extra Height Oven

Available for the Hungry penguin, Fat penguin and High & Mighty.

This increases the internal oven height by 100mm.

(This is a non standard product so please allow for extended lead times).

Additional cost of:

£250 (inc VAT)


Extra Height Legs

Available for the Short penguin, Woody, Hungry penguin and Penguin 8.

These are made to order. Please discuss your height requirements with us.

(This is a non standard product so please allow for extended lead times).

Additional cost of:

£60 (inc VAT)

Chilli Billie Starter Pipe

Stainless steel starter pipe for the Chilli Billie with integrated cleaning access hatch. Slots into the flue outlet of the stove.

Twin wall flue can be connected directly into this.

Length 335mm.

Diameter 5 inches.

Fits into the penguin enclosure bracket.

£84.86 (inc VAT)

Corner Steel Hearth

A waxed mild steel quadrant hearth.

50mm Height

900mm Radius

£265.00 (inc VAT)

Stove Collar

Mild steel stove collar for all models (ex Chilli Billie)

Diameter 5 inches. Fixed onto top surface of the stove with two nuts and two bolts.

Seal in place on base of collar.

These collars come out as standard with all stoves. This is a replacement price only.

£33.60 (inc VAT)

Like our stoves these are all made here in the uk